spec no: dsaa1789 rev no: v.8 date: mar/14/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: b.h.li 1.6x0.8mm smd chip led lamp features 1.6mmx0.8mm smt led, 1.1mm thickness. low power consumption. w ide view ing angle. ideal for backlight and indicator. various colors and lens types available. package: 2000pcs / reel . rohs compliant. package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .1(0.004") unless otherwise noted. 3.specifications are subject to change without notice. description the super bright red source color devices are made with gallium aluminum arsenide red light emitting diode . kp - 1608src - prv super bright red
spec no: dsaa1789 rev no: v.8 date: mar/14/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: b.h.li selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 kp - 1608src - prv super bright red (gaalas) water clear 36 100 120 electrical / optical characteristics at t a =25 c symbol parameter device typ. max. test conditions units peak peak wavelength super bright red 660 nm i f =20ma d dominant wavelength super bright red 640 nm i f =20ma ? 1/2 spectral line half - width super bright red 20 nm i f =20ma c capacitance super bright red 45 pf v f =0v;f=1mhz v f forward voltage super bright red 1.85 2.5 v i f =20ma i r reverse current super bright red 10 ua v r = 5v absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. parameter super bright red units power dissipation 100 mw dc forward current 30 ma peak forward current [1] 155 ma reverse voltage 5 v operating / storage temperature - 40c to +85c
spec no: dsaa1789 rev no: v.8 date: mar/14/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: b.h.li super bright red kp - 1608src - prv
spec no: dsaa1789 rev no: v.8 date: mar/14/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: b.h.li recommended soldering pattern (units : mm ) tape specifications (units : mm ) kp - 1608src - prv if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|